psa oxygen generator for industrial

1) Oxygen production: 100 - 3,000Nm3/h 2) Characteristics: a) Quick and convenient start and stop b) Low investment and energ

Type	Gas quantity	Purity	Compressed air	Overall dimensions	Weight
	Nm3/h	% N2	Nm3/min	Mm	Kg
FDY-10	10	93	2.2	2025*850*1988	1700
FDY-20	20	93	4.4	2350*1050*2206	2400
FDY-30	30	93	6.6	2500*1100*2239	2700
FDY-40	40	93	8.8	2500*1100*2450	2950
FDY-50	50	93	11	2900*1300*2576	3500
FDY-60	60	93	13.2	2900*1300*2576	4000
FDY-80	80	93	17.6	3550*1500*2583	5000
FDY-100	100	93	22	4050*1800*2725	6000

Specifications

a) Air fan and vacuum pump: air fan provide air source for the whole system. Based on VPSA oxygen generator design condition and customer requirements,fan with proper outlet air pressure is to be provided. Vacuum pump ensurescorrect system operation and keeps the system in ideal vacuum state, whichensures equipment constantly adsorb nitrogen and produce oxygenb) Temperature regulating system: air temperature regulating system is made up of a water cooler and an electric heater. The temperature of air compressed by fan is around 65 – 70oC, passing the water cooler, its temperature is reduced to meet the requirements of process operation. Then it is sent into the adsorption towers. In winter, the temperature of air is to be increased by the electric heater and reaches the requirements of process operationc) Adsorption system: the adsorption system mainly consists of two towers filledwith zeolite molecular sieve adsorbents and piping valves etc. Air enters into the bottom of one tower, when passing through the adsorbent layer, N2, oxygen,Vapor are adsorbed by molecular sieve and oxygen passes through the absorbents and gathers at the top of tower, flowing out as produced gas, meanwhile the other tower is in the process of regeneration. When the adsorbingtower almost reaches saturation, by the operation of control system, the processing air flows into the regenerated tower and begins to produce oxygen.Two towers alternately adsorb and constantly produce oxygen d) Oxygen buffer tank: compared with three-tower process, oxygen generator with two towers can not produce consecutive oxygen, therefore, a buffer tankwith large volume is needed for stable oxygen outpute) Control system: i) System process is achieved by DOS control system. In this system, valvesswitches are independently controlled by PLC (Programmable Logic Controller).Analog signals of test sensors communicate with the main control systemthrough specific communication protocols. Relevant data of specific unit can be sent to main control system and remote control signals of main control system can be accepted by specific unit ii) In order to ensure safe oxygen supply, functions of interlink, protection,alarm, print, record etc can be provided iii) The output variation of oxygen supply can be adjusted by DCS control system.System operating parameters can be adjusted to save energyiv) The main control system adopts industry computer, provided with specificsoftware and convenient human-machine touching screen, Start/stop andoperating parameter collection can be realized on control panel. Remote monitor and print of running status record can be easily achieved.

psa oxygen generator for industrial