Feda psa oxygen generator for GMA industrial

1) Oxygen flow: 100 - 3,000Nm3/h 2) Characteristics: auto-oprating 3) Quick and convenient start and stop 4) Low investment

Type	Gas quantity	Purity	Compressed air	Overall dimensions	Weight
	Nm3/h	% N2	Nm3/min	Mm	Kg
FDY-40	40	93	8.8	3900*1000*2650	3100
FDY-50	50	93	11	4400*1100*2560	3500
FDY-60	60	93	13.2	4400*1100*2560	3700
FDY-80	80	93	17.6	4700*1250*2600	5000
FDY-100	100	93	22	6300*1600*2738	5700
FDY-120	120	93	26.4	6900*1600*2652	6250
FDY-150	150	93	33	6900*1600*2752	6500
FDY-180	180	93	39.6	7300*1800*2583	7600
FDY-200	200	93	44	6400*1700*1850	11400

Specifications

a) Air fan and vacuum pump: air fan provide air source for the whole system. Based on VPSA oxygen generator design condition and customer requirements,fan with proper outlet air pressure is to be provided. Vacuum pump ensurescorrect system operation and keeps the system in ideal vacuum state, whichensures equipment constantly adsorb nitrogen and produce oxygenb) Temperature regulating system: air temperature regulating system is made up of a water cooler and an electric heater. The temperature of air compressed by fan is around 65 – 70oC, passing the water cooler, its temperature is reduced to meet the requirements of process operation. Then it is sent into the adsorption towers. In winter, the temperature of air is to be increased by the electric heater and reaches the requirements of process operationc) Adsorption system: the adsorption system mainly consists of two towers filledwith zeolite molecular sieve adsorbents and piping valves etc. Air enters into the bottom of one tower, when passing through the adsorbent layer, N2, oxygen,Vapor are adsorbed by molecular sieve and oxygen passes through the absorbents and gathers at the top of tower, flowing out as produced gas, meanwhile the other tower is in the process of regeneration. When the adsorbingtower almost reaches saturation, by the operation of control system, the processing air flows into the regenerated tower and begins to produce oxygen.Two towers alternately adsorb and constantly produce oxygen d) Oxygen buffer tank: compared with three-tower process, oxygen generator with two towers can not produce consecutive oxygen, therefore, a buffer tankwith large volume is needed for stable oxygen outpute) Control system: i) System process is achieved by DOS control system. In this system, valvesswitches are independently controlled by PLC (Programmable Logic Controller).Analog signals of test sensors communicate with the main control systemthrough specific communication protocols. Relevant data of specific unit can be sent to main control system and remote control signals of main control system can be accepted by specific unit ii) In order to ensure safe oxygen supply, functions of interlink, protection,alarm, print, record etc can be provided iii) The output variation of oxygen supply can be adjusted by DCS control system.System operating parameters can be adjusted to save energyiv) The main control system adopts industry computer, provided with specificsoftware and convenient human-machine touching screen, Start/stop andoperating parameter collection can be realized on control panel. Remote monitor and print of running status record can be easily achieved.

Feda psa oxygen generator for GMA industrial